Title: How to install your own heating - hot topics and practical guides on the Internet in the past 10 days
As winter approaches, how to install your own heating has become a hot topic on the Internet recently. This article will combine the hot content of the past 10 days to provide you with a structured guide, covering material selection, installation steps and precautions.
1. Data statistics on popular heating installation topics across the entire network (last 10 days)
| Topic classification | Discuss the popularity index | main focus |
|---|---|---|
| Electric heater DIY | 8.5/10 | Energy saving, safety |
| Plumbing system installation | 7.2/10 | Pipeline layout, cost control |
| Intelligent temperature control equipment | 9.1/10 | Mobile phone remote control |
2. Core steps of self-installed heating
1. Preliminary preparation
•Tool list: Pipe wrench (200-300mm), hot melter (suitable for PPR pipe), pressure test pump
•Material calculation: Approximately 600W power is required for every 10㎡. The length of the radiator is selected according to 70% of the window width.
| Room area | Recommended radiator power | Reference price range |
|---|---|---|
| 10-15㎡ | 800-1200W | ¥500-800 |
| 20-25㎡ | 1500-2000W | ¥900-1500 |
2. Installation process
(1)Positioning measurement: ≥15cm from the ground and ≥5cm from the wall to ensure air convection
(2)Pipe laying: Adopting a double-pipe parallel system, the slope is maintained at 0.3% to facilitate drainage.
(3)System testing: Pressurize to 1.5 times working pressure, keep pressure for 30 minutes without leakage
3. Solutions to recent hot issues
| High frequency problem | Technical points | Popular tool recommendations |
|---|---|---|
| Leaking pipes | Use raw material tape + thread sealant for double protection | LOCTITE 55 sealing rope |
| uneven temperature | Install automatic exhaust valve + hydraulic balance valve | Danfoss RA-N valve |
4. Safety precautions (recently searched content)
•electrical safety: A leakage protector must be installed (30mA action current recommended)
•gas equipment: Connections must be made by certified personnel. It is strictly prohibited to modify the gas pipelines by yourself.
•stress test: The first pressurization of a newly installed system shall not exceed 0.8MPa.
5. Intelligent control solution (hotly searched technology in the past 7 days)
1.WiFi thermostat: Xiaomi/Nest series products support precise temperature adjustment
2.AI learning system: Nest Thermostat can remember user habits
3.Energy consumption monitoring: Install a power monitoring socket (such as TP-Link HS110)
Conclusion:According to recent hot discussions on the Internet, self-installed heating needs to focus on system balance and intelligent control. It is recommended that professionals should still be hired for complex systems, and basic modifications can be carried out by referring to this guide. During winter construction, attention should be paid to the low-temperature properties of materials. PPR pipes require special welding processes below 5°C.
check the details
check the details
en
