How to disassemble the Cortex hair clipper
In daily use, the Cortex hair clipper may need to be disassembled for cleaning, blade replacement or maintenance. This article will introduce in detail the disassembly steps of the Cortex hair clipper, and attach relevant precautions and a tool list to help you complete the operation easily.
1. Preparations before disassembly

Before disassembling the Cortex hair clipper, you need to prepare the following tools and ensure safe operation:
| Tools/Materials | Purpose |
|---|---|
| Small Phillips screwdriver | For unscrewing fixing screws |
| soft bristle brush | Clean the blade and internal dust |
| Lubricating oil | Maintain the moving parts of the cutter head |
| Anti-static gloves (optional) | Avoid static electricity damaging circuits |
2. Detailed explanation of disassembly steps
1.Turn off the power and remove the battery: Make sure the hair clipper is turned off. If it is designed with a removable battery, you need to take out the battery first.
2.Disassemble the cutter head:
3.Separate shell:
4.Internal component disassembly:
3. Cleaning and maintenance suggestions
| parts | Cleaning method | Maintenance frequency |
|---|---|---|
| Blade | Use a soft-bristle brush to clean broken hair and alcohol pads to disinfect | after each use |
| Inside the fuselage | Air blow to remove dust and cotton swab to wipe the circuit board | every 3 months |
| moving parts | Add 1-2 drops of special lubricant | every 6 months |
4. Precautions for reassembly
1. Make sure all screws and buckles are fully reset to avoid loosening.
2. When installing the cutter head, align the positioning holes, tighten the screws manually and then lightly reinforce them.
3. Before starting the test, confirm that the battery is installed correctly and there is no abnormal sound.
5. Frequently Asked Questions
| question | Solution |
|---|---|
| The screw slide cannot be unscrewed | Use a rubber band to increase the friction of the screwdriver, or replace the screwdriver with a suitable size |
| The shell is difficult to separate | Check if there are any undiscovered fixing points. Use a plastic spudger to assist. |
| The cutter head does not run after assembly | Check whether the motor connection cable is plugged in tightly and whether the cutter head is installed in place. |
Through the above steps, you can safely complete the disassembly and maintenance of the Cortex hair clipper. If you encounter a complex fault, it is recommended to contact the official after-sales service.
check the details
check the details