• Model NO.：All Sizes
• Transport Package：Plastic Box Inside, Carton Outside
• Specification：33x29x19cm
• Trademark：OEM Or GW
• Origin：Zhuzhou, Hunan Province, China
• HS Code：8207709000
• Production Capacity：50000PCS,Month

Basic Info.

Model NO. All Sizes Transport Package Plastic Box Inside, Carton Outside Specification 33x29x19cm Trademark OEM Or GW Origin Zhuzhou, Hunan Province, China HS Code 8207709000 Production Capacity 50000PCS/Month

Product Description

 65HRC Blue Nano Coating Super Performance Cemented Carbide End Mill for Staineless Steel 

blue nano end mill, high quality with strong compition prices. good feedback and reputation,for cutting stainless steel, mould steel, carbon steel and vairous difficulty machining materials.


Standard Sizes: 
 

Order No.	Flute dia (d)	Cutting length ( l )	Shank dia (D)	Overall length(L)
1.0×2.5×4D×50L	1.0	2.5	4	50
1.5×4×4D×50L	1.5	4	4	50
2.0×5×4D×50L	2.0	5	4	50
2.5×7×4D×50L	2.5	7	4	50
3.0×8×4D×50L	3.0	8	4	50
3.5×10×4D×50L	3.5	10	4	50
4.0×10×4D×50L	4	10	4	50
4.5×11×6D×50L	4.5	11	6	50
5.0×13×6D×50L	5.0	13	6	50
5.5×13×6D×50L	5.5	13	6	50
6.0×15×6D×50L	6.0	15	6	50
6.5×15×8D×60L	6.5	15	8	60
7.0×17×8D×60L	7.0	17	8	60
7.5×17×8D×60L	7.5	17	8	60
8.0×20×8D×60L	8.0	20	8	60
8.5×25×10D×75L	8.5	25	10	75
9.0×25×10D×75L	9.0	25	10	75
9.5×25×10D×75L	9.5	25	10	75
10.0×25×12D×75L	10.0	25	12	75
10.5×25×12D×75L	10.5	25	12	75
11.0×28×12D×75L	11.0	28	12	75
11.5×28×12D×75L	11.5	28	12	75
12.0×30×12D×75L	12.0	30	12	75
13.0×33×16D×100L	13.0	33	16	100
14.0×40×16D×100L	14.0	40	16	100
15.0×40×16D×100L	15.0	40	16	100
16.0×40×16D×100L	16.0	40	16	100
17.0×40×20D×100L	17.0	40	20	100
18.0×40×20D×100L	18.0	40	20	100
19.0×40×20D×100L	19.0	40	20	100
20.0×40×20D×100L	20.0	40	20	100
25.0×40×25D×100L	25.0	40	25	100

1. Description:

The edge is covered with ultrafine nano-coatings, which can directly process the heat-treated materials below 65 degrees with high-speed rough processing strip, reduce the number of tool changes, and improve the processing efficiency of machine tools.

The new fine tungsten steel base material has strong wear resistance and strength, and is specially used for milling cutters with high hardness.

The helix angle is 35 degrees, the front angle is large, and the edge is close to the mirror. It is more advantageous to reduce the milling resistance. The triangle design of the end face of the rear corner is adopted, and the rough processing strength is sufficient to solve the problem of tool collapse.


2. Products Description:

Micro grain raw material
Grain size:  0.4-0.6μm
Co   10%, 12% 
TRS   >3600 N/mm2
Hardness   HRA 91.8-92.5
Work piece   HRC45-50   HRC55-60   HRC65   HRC68
Helix angle   30°-45 °
Diameter of cutting edge   0.2-0.9 mm; 1-20 mm
Diameter of rods   4-20 mm      
Length   50-100 mm
Cutting Form   Flat, Square, Ball nose, Corner Radius, Taper Flute, etc
Flutes No.   1-7